| 
                            
                     
                        Dettagli:
                                                     
                
 
  | 
                    
| Frequenza di caricamento: | Può essere impostato | Test Actus: | 1000 mm | 
|---|---|---|---|
| Altezza di impatto: | 152 mm | Garanzia: | 1 anno | 
| Carico dello schienale: | 400n | Risultati del test: | Uscita da stampante integrata | 
| Risoluzione di temperatura: | ± 0,1 ℃ | Gamma contatore: | 0-99999 volte | 
| Forza di caricamento del corrimano: | 250n | Altezza della fiamma: | 35 mm | 
| Modalità di induzione: | cellula di carico di precisione | Specifiche della macchina: | 6,8 m × 2,6 m × 2,4 m | 
| Dimensioni: | 3.5mx 2.4mx2.4m | Pressione dell'aria: | 4 ~ 7 bar | 
| Risoluzione di posizione: | min. 0,2 mm | 
HD-F801-2 Gas Chromatography
 
A whole set: Automatic thermal desorption apparatus+ Gas Chromatography+Hydrogen generator +Air generator
Technical Parameters of Gas Chromatography
| 
 Furnace size  | 
 28x 30 x18cm  | 
| 
 Temperature range  | 
 
 
 
 
 
 
 
 
 
  | 
| 
 Temperature setting  | 
 1℃  | 
| 
 programmed heating rate  | 
 0.1℃  | 
| 
 Maximum heating speed  | 
 120℃/ min  | 
| 
 Temperature stability  | 
 0.01℃when the ambient temperature changes by 1℃  | 
| 
 Programmed temperature rise  | 
 7-step programmed temperature rise  | 
| 
 Loss compensation of operable column  | 
 dual channel  | 
| 
 Power supply  | 
 220V±10%,2500W (maximum)  | 
| 
 Volume  | 
 57x 55 x48 cm  | 
| 
 Weight  | 
 around 50kg  | 
Technical Parameters of Detector:
| 
 Hydrogen flame ionization detector (FID)  | 
|
| 
 Maximum operating temperature  | 
 400℃  | 
| 
 Detection limit  | 
 ≤5 x 10-12g / S  | 
| 
 Drift  | 
 ≤5 x 10-13a / 30min  | 
| 
 Noise  | 
 2 x 10-13a  | 
| 
 Dynamic linear range  | 
 ≥107  | 
| 
 Thermal conductivity cell detector(TCD)  | 
|
| 
 Maximum operating temperature  | 
 400℃  | 
| 
 Sensitivity  | 
 ≥10000 mv.ml/mg[n-C16]  | 
| 
 Drift  | 
 ≤100uv / 30mi  | 
| 
 Noise  | 
 ≤20ua  | 
| 
 Dynamic linear range  | 
 ≥104  | 
| 
 Electronic capture detector (ECD)  | 
|
| 
 Maximum operating temperature  | 
 350℃  | 
| 
 Detection limit  | 
 ≤6×10-15 g / ml (γ - 666)  | 
| 
 Drift  | 
 ≤50uv / 30min  | 
| 
 Noise  | 
 ≤20uv  | 
| 
 Dynamic linear range  | 
 ≥104  | 
Technical Parameters of Automatic thermal desorption apparatus
| 
 Temperature control range of sample area  | 
 5℃-400℃; Heat power:200W  | 
| 
 Temperature control range of valve injection system  | 
 5℃-180℃; Heat power:60W  | 
| 
 Sample transfer line temperature control range  | 
 5℃-200℃; Heat power:40W  | 
| 
 Temperature Control Accuracy  | 
 < ±0.1℃  | 
| 
 Temperature control gradient  | 
 < ±0.1℃  | 
| 
 Desorption recovery  | 
 > 95%  | 
| 
 Analog sampling flow  | 
 100ml/min  | 
| 
 Blowback cleaning flow  | 
 0~200ml/min  | 
| 
 Machine Size and Weight( L x W x H)  | 
 400x170x300mm,Around 12kg  | 
Persona di contatto: Mary
Telefono: 13677381316
Fax: 86-0769-89280809